線路板超聲波清洗機的工作效率很高，被清洗的線路板只要有接觸到溶液的部位，都會被*的清洗干凈，而這種清洗方式，盡管是在高能量的清洗槽內進行的，線路板和機械本身都不會被破壞。然而它的優勢不僅僅只有清洗*，還有其它的優勢，具有還有以下六個方面的優勢：

The working efficiency of the circuit board ultrasonic cleaning machine is very high. As long as the cleaned circuit board contacts the solution, it will be thoroughly cleaned. Although this cleaning method is carried out in the high-energy cleaning tank, the circuit board and the machine itself will not be damaged. However, its advantages are not only thorough cleaning, but also other advantages. It also has the following six advantages:

線路板超聲波清洗機

Circuit board ultrasonic cleaning machine

優勢一——清洗速度快。線路板超聲波清洗機的速率比其他清洗方式都高，比浸泡式清洗快10～20倍，比噴淋式清洗提高20％一50％的功效。

Advantage 1 - fast cleaning speed. The speed of circuit board ultrasonic cleaning machine is higher than other cleaning methods, 10 ~ 20 times faster than immersion cleaning, and 20% - 50% more effective than spray cleaning.

優勢二——清洗*。與噴淋和與浸泡相比，它沒有清洗死角，因此更適用于內外結構復雜，微觀不平，有狹縫、小孔、拐角、線路密集的電子線路板。

Advantage 2 - all-round cleaning without dead angle. Compared with spraying and soaking, it does not clean dead corners, so it is more suitable for electronic circuit boards with complex internal and external structures, micro unevenness, slits, small holes, corners and dense lines.

優勢三——線路板不會被損壞變形。與噴淋相比，專業的線路板超聲波清洗機清洗薄的和微小線路板時，也會保證線路板的完好。

Advantage 3 - the circuit board will not be damaged or deformed. Compared with spraying, the professional circuit board ultrasonic cleaning machine will also ensure the integrity of the circuit board when cleaning thin and micro circuit boards.

優勢四——適應清洗多種污漬。可以用于除油、去污、除銹、除氧化皮、鈍化等多種頑固污漬。

Advantage 4 - suitable for cleaning a variety of stains. It can be used for oil removal, decontamination, rust removal, deoxidization, passivation and other stubborn stains.

優勢五——適用材質廣。專業的線路板超聲波清洗機適用于鋼、鑄鐵、不銹鋼、銅、鋁、玻璃、電路板、電子和光學元件等各種零件的清洗工作。

Advantage 5 - wide application of materials. The professional circuit board ultrasonic cleaning machine is suitable for cleaning various parts such as steel, cast iron, stainless steel, copper, aluminum, glass, circuit board, electronic and optical components.

優勢六——清洗一致性好。不管需要清洗的線路板是寬是窄，是大事小，結構復雜還是簡單，單件還是批量，放入線路板超聲波清洗機中清洗后，都可以獲得手工清洗的均一的清潔度。

Advantage 6 - good cleaning consistency. No matter whether the circuit board to be cleaned is wide or narrow, large or small, complex or simple structure, single piece or batch, after being cleaned in the circuit board ultrasonic cleaning machine, you can obtain the unparalleled uniform cleanliness of manual cleaning.

今日的精彩內容就分享到這了，更多的精彩內容請點擊我們的網站：工業超聲波清洗機，我們會有很多的內容為您呈現.

Today's highlights are shared here. For more highlights, please click our website: industrial ultrasonic cleaning machine , we will have a lot of content for you