1汽車、工程機械零部件行業：汽車行業的應用，應該是泛的，汽車只要有任何零部件，都可以采用超聲波清洗，如缸體、缸蓋、車軸、氣門和凸輪軸、制動器、發動機、離合器、減速機、殼體、軸、轉向機等，由于汽車在制造過程中，對零件的清潔度要求較高，所以可以使用超聲波清洗機；工程機械零部件行業應用廣泛，如一些鑄鐵、銅鑄件、鋁鑄件、金屬零件等，也可以使用，大多是剛加工出來的清洗上面的零件油、切削液和金屬屑等，對于模具生產和加工零件來說，當然也可以清洗，模具在生產過程中，模具中會有很多油。
1 Auto, engineering machinery parts industry: The auto industry should be the most widely used industry. As long as there are any parts of the auto, ultrasonic cleaning can be used, such as cylinder block, cylinder head, axle, valve and camshaft, brake, engine, clutch, reducer, housing, shaft, steering gear, etc. Ultrasonic cleaning can be used because of the high requirements for the cleanliness of parts during the manufacturing process of the auto; Construction machinery parts are widely used in the industry, such as some cast iron, copper castings, aluminum castings, metal parts, etc., which can also be used. Most of them are just processed parts oil, Cutting fluid, metal chips, etc. For mold production and processing parts, of course, they can also be cleaned. There will be a lot of oil in the mold during the production process.
2航空、航天、，進入21世紀以來，我國航空航天企業發展突飛猛進，飛機零部件行業也取得了良好的成績，航空航天工業的主要文物或金屬零件清洗，如飛機發動機零件、飛機發動機零部件等作為飛機發動機葉片。
Since entering the 21st century, China's aviation and aerospace enterprises have made rapid progress, and the aircraft parts industry has also achieved good results. The main cultural relics or metal parts cleaning in the aerospace industry, such as aircraft engine parts and military aircraft engine parts, are used as aircraft engine blades.
3軌道交通行業：軌道交通行業主要由動車組、高鐵和列車部件組成，一般為粉末冶金剎車片、剎車片及控制系統部件等。
3 Rail transit industry: the rail transit industry is mainly composed of Multiple unit, high-speed rail and train components, generally including powder metallurgy brake pads, brake pads and control system components.
4氣動、液壓和精密零件行業：氣動液壓可洗工件精密零件行業一般都有氣動零件、液壓零件和剛生產精密零件的精密零件等，會有很多小盲孔，工作人員會用專業的放大設備檢查制造的零件是否合格，對于超聲波清洗機的清洗要求也很高，有些盲孔因為超聲波振動的強度問題很有可能被清洗干凈，但超聲波清洗機不會出現這種問題，擁有的固井工藝，保證換能器脫落，并采用進口換能器，超聲波轉化效果達90%以上。
4. Pneumatic, hydraulic and precision parts industry: pneumatic and hydraulic washable workpieces precision parts industry generally has pneumatic parts, hydraulic parts and precision parts that have just produced precision parts. There will be many small blind holes. The staff will use professional amplification equipment to check whether the manufactured parts are qualified. The cleaning requirements for Ultrasonic cleaning are also very high. Some blind holes are likely to be cleaned because of the strength of ultrasonic vibration, However, this problem will not occur with the Ultrasonic cleaning, which has a unique cementing process to ensure that the transducer will never fall off. Imported transducers are used, and the ultrasonic conversion effect reaches more than 90%.
5精密電子、光學行業：主要是手表、眼鏡等小飾品。
5 Precision electronics and optics industry: mainly watches, glasses and other trinkets.
6硅材料產業：芯片、半導體、太陽能芯片、光伏組件等。
6. Silicon material industry: chips, semiconductors, solar chips, photovoltaic modules, etc.
7旋轉框架行業：適用于各行各業。放置零件或物品時，旋轉盒上會殘留一些污垢。
7. Rotating frame industry: suitable for various industries. When placing parts or items, there may be some dirt left on the rotating box.
8零部件翻新、維修和保養行業：零部件翻新的范圍比較廣，一般是汽車零部件、螺母和螺釘等的翻新。在汽車維修行業，清洗汽車發動機零部件也是可能的。
8. Component refurbishment, repair, and maintenance industry: The scope of component refurbishment is relatively broad, generally including the refurbishment of automotive components, nuts, and screws. In the automotive maintenance industry, it is also possible to clean automotive engine components.
