產品介紹
| PNF90精密行星伺服減速器技術參數(1) PNF90 Performance Specifications (1) |
| 型號 Part No. | 速比 Ratio | 級數Ranks | 額定輸出扭矩 Tr(Nm) Norminal Output torque | 慣性矩 (kg-cm2) Mss moment of inertia | 抗扭剛度 (Nm/arc-min) Torsional stiffness | 工作噪聲 dB(A) Operating noise |
| PNF90-003 | 3:1 | 單級Single | 120 | 2 | 5 | 62 |
| PNF90-004 | 4:1 | 單級Single | 110 | 1.8 | 5 | 62 |
| PNF90-005 | 5:1 | 單級Single | 100 | 1.8 | 5 | 62 |
| PNF90-007 | 7:1 | 單級Single | 90 | 1.6 | 4 | 62 |
| PNF90-010 | 10:1 | 單級Single | 80 | 1.6 | 4 | 62 |
| PNF90-009 | 9:1 | 雙級Double | 120 | 2 | 5 | 62 |
| PNF90-012 | 12:1 | 雙級Double | 110 | 1.8 | 5 | 62 |
| PNF90-015 | 15:1 | 雙級Double | 100 | 1.8 | 5 | 62 |
| PNF90-016 | 16:1 | 雙級Double | 110 | 1.8 | 5 | 62 |
| PNF90-020 | 20:1 | 雙級Double | 100 | 1.8 | 5 | 62 |
| PNF90-021 | 21:1 | 雙級Double | 90 | 1.6 | 5 | 62 |
| PNF90-025 | 25:1 | 雙級Double | 100 | 1.8 | 5 | 62 |
| PNF90-028 | 28:1 | 雙級Double | 90 | 1.6 | 5 | 62 |
| PNF90-030 | 30:1 | 雙級Double | 80 | 1.6 | 5 | 62 |
| PNF90-035 | 35:1 | 雙級Double | 90 | 1.6 | 4 | 62 |
| PNF90-040 | 40:1 | 雙級Double | 80 | 1.6 | 5 | 62 |
| PNF90-049 | 49:1 | 雙級Double | 90 | 1.6 | 4 | 62 |
| PNF90-050 | 50:1 | 雙級Double | 80 | 1.6 | 4 | 62 |
| PNF90-070 | 70:1 | 雙級Double | 80 | 1.6 | 4 | 62 |
| PNF90-100 | 100:1 | 雙級Double | 80 | 1.6 | 5 | 62 |
| |||||||
| L: 單級=71 雙級=95.3 L：Single=71 Double=95.3 | AD：一般為40，當電機軸長度大于40時，AD也相應加長。 AD：General length is 40,when the motor shaft's length wngpr than 40 AD wlu be longer corresnpunzbhgly | ||||||
| PNF90精密行星伺服減速器技術參數(2) PNF90 Performance Specifications (2) |
| 級數 Ranks | | 單級 Single | 雙級 Double |
| 效率 Efficiency | | 96% | 93% |
| 回差 Backlash | | ≤6 | ≤12 |
| 重量 Weight | (kg) | 3 | 3.7 |
| 極限扭矩 Ultimate torque | (Nm) | 1.5～2倍的額定輸出扭矩1.5～2times'rated output torque | |
| 工作溫度 Operating temperature | (0C) | ﹣25～90 | |
| 工作壽命 Life time | (h) | 10000小時（h） | |
| 額定輸入轉速 Nominal input speed | (rpm) | 4000 | |
| 極限輸入轉速 Max input speed | (rpm) | 6000 | |
| 旋轉方向 Direction of rotation | | 與輸入方向一致 Same as input | |
| 潤滑 Lubrication | | 閉氣系統 終身潤滑 Life time grease lubrication,closed system | |
| 防護等級 Degree of protection | | IP64 | |
| 安裝方向 Installation position | | 任意 Any Variable | |
| 如需高負載軸承，應與工廠協商 Consult factory,If higher bearing loading is required | 額定軸向負載 Fa Axial Loadings Fa
| 額定軸向負載 Fr Radial Loadings Fr |
