- 商品說明
噴涂設備系列
STR-NKP-1型管道內壁噴涂器 Spraying machine for piping inner wall
◆適用范圍 Applicable scope
適用于小孔及中型管道的內壁涂裝，它是利用無氣噴涂機輸送來的高壓涂料，通過特制的噴嘴，使涂料霧化后直接形成喇叭形（園錐形、空心），均勻地噴在管道內表面，從而實現管道的涂裝。 NKP-1型主要適用于Ф50-Ф300mm的管道，涂料粘度不得高于80秒（4號福特杯）。如果涂料粘度高于80秒，需加溶劑稀釋。NKP-1型基本上不受管道長度限制，但不長于15米。
Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.
噴涂管道內孔范圍Spray pipe hole range(mm)：Ф50-300 |
機身長度Fuselage length (mm)：Ф50×280(長) |
機身重量Body weight (kg)：0.9 |
涂料控制開關手噴槍重量Coating control switch hａnd gun weight（weight）：0.45 |
安裝方框圖 Installation to which
氣源 Gas source | 空氣減壓閥 Air pressure reducing valve | 油水分離器 Oil-water separator | 無氣噴涂機 No gas | |||||||||
高壓軟管 High-pressure hose | NKP-1 內孔噴涂器 Hole spraying device | 手噴槍 Hａnd gun | 噴咀 Wards | |||||||||
