技術參數
TORQUE | SHEAR STRESS | VISCOSITY RANGE | |
SPINDLE | RANGE | RANGE(Pa) | cP(mPa*s） |
V-71 | NOT RECOMMENDED FOR USE ON LV TORQUE | ||
V-72 | LV | .188-1.88 | 104.04-1.04K |
V-73 | LV | .938-9.38 | 502-5.02K |
V-74 | LV | 9.38-93.8 | 5.09K-50.9K |
V-75 | LV | 3.75-37.5 | 1.996K-19.96K |
V-71 | RV | .5-5 | 262-2.62K |
V-72 | RV | 2-20 | 1.11K-11.1K |
V-73 | RV | 10-100 | 5.35K-53.5K |
V-74 | RV | 100-1K | 54.3K-543K |
V-75 | RV | 40-400 | 21.3K-213K |
V-71 | HA | 1-10 | 524-5.24K |
V-72 | HA | 4-40 | 2.22K-22.2K |
V-73 | HA | 20-200 | 10.7K-107K |
V-74 | HA | 200-2K | 108.6K-1.086M |
V-75 | HA | 80-800 | 42.6K-426K |
V-71 | HB | 4-40 | 2.096K-20.96K |
V-72 | HB | 16-160 | 8.88K-88.8K |
V-73 | HB | 80-800 | 42.8K-428K |
V-74 | HB | 800-8K | 434.4K-4.344M |
V-75 | HB | 320-3.2K | 170.4K-1.704M |
V-71 | 5xHB | 20-200 | 10.48K-104.8K |
V-72 | 5xHB | 80-800 | 44.4K-444K |
V-73 | 5xHB | 400-4000 | 214K-2.14M |
V-74 | 5xHB | 4K-40K | 2.172M-21.72M |
V-75 | 5xHB | 1.6K-16K | 852K-8.52K |
Note：1.1Pa=10dyne/cm2 2.此粘度范圍是在轉速為10RPM時得到的 3.5xHB扭矩是zui高的有效扭矩
M=1 million K=1 thousａnd Pa=Pascal cP=Centipoise mPa·s=Millipascal·seconds
美國博勒飛槳式轉子-特點：
1.在轉子浸入樣品時，樣品的結構破壞zui小
2.在測量時可保持樣品顆粒的懸浮狀態
3.當配合使用軟件時，可得完整流變曲線分析的粘度數據
4.在低轉速下可以提供有關屈服行為的信息
5.槳式轉子的長度和尺寸比例遵從工業標準要求
6.一套標準轉子有3支，可以覆蓋很大的測量范圍
7.可選配的V-74和V-75轉子適用于更大的測量范圍和更小的樣品容器
