2871-A-01,0-FF-MS-GM81-024/DC-05 2871-2/2常閉型電磁閥-DN1-FKM密封-黃銅閥體-G1/8"-024/DC-5
類型 2871 - 直動式二通標準比例電磁閥
類型描述
直動式電磁控制閥 2871 型，在控制回路中用作調節單元。由于采用彈性閥座密封件，閥門密閉性好（內置關斷功能），能達到與通徑相當?shù)念~定壓力。閥門的柱塞無摩擦力，因而具有的調節性能。該閥尤其適合于控制需求較高的應用（控制范圍廣，干燥氣體等）。
（1）控制范圍廣
（2）快速響應
（3）緊湊型結構
（4）通徑 DN 0.05 - 2.0 mm
（5）連接接口1/8”或底板連接
| Type | 2871 | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Actuator type | Plunger valve | |
| Operation | direct-acting | |
| Main valve operating principle | Globe valve | |
| Switch function | constant | |
| Main valve orifice 1 (P) (mm) | 1 | mm |
| Main valve orifice 1 (inch) | 1/32 inch | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Main valve wetted material | Brass | |
| Core guide | Form spring | |
| Core guide 2 | Form spring | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Steam version | No | |
| Media separation | No | |
| Flow | Below seat | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/8 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/8 | |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| AC voltage | No | |
| DC voltage | Yes | |
| Voltage tolerance positive | 10 | % |
| Voltage tolerance negative | 10 | % |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 20 | mm |
| Coil resistance | 82 | Ohm |
| Protection type (IP max. with suitable connector) | IP65 | |
| Thermal insulation class of the actuator | H | |
| Rated power consumption | 5 | W |
| Electrical connection sort | Plug pattern form B according to industrial standard | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Electrical connection type | male | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Kv value (water) | 0,027 | m3/h |
| QNn value (gas) | 29 | l/min |
| PWM frequency min. | 1.400 | Hz |
| PWM frequency max. | 1.500 | Hz |
| Operating range | 1:200 | |
| Nominal operation/Duty cycle | 100 | % |
| Nominal pressure min | -1 | bar |
| Nominal pressure max | 10 | bar |
| Differential pressure max | 5 | bar |
| Temperature medium min | -10 | °C |
| Temperature medium max | 90 | °C |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Mounting position | any | |
| Medium-contacting part core material | Stainless steel | |
| Medium-contacting part stopper material | Stainless steel | |
| Medium-contacting part core guide tube material | Stainless steel | |
| Medium-contacting part core guide element 1 material | Stainless steel | |
| Medium-contacting part core guide element 2 material | Stainless steel | |
| Suitable for liquid media | No | |
| Suitable for gaseous media | Yes | |
| 重量 | 0,12 | kg |
