Tulsion®  T-42 UPS                                                                                                                  ISO-9001/ISO-14001/OHSAS-18000  

均粒強酸形陽樹脂 , 氫 H+ / 鈉 Na+
均粒強酸性陽離子適用于超 純水的可再生混床系統

Tulsion®  T-42 UPS 強酸型陽性離子交換樹脂 ,是一款有較高的交換容量 ,及同時擁有的物理及化學穩定品質。可應用于汽電共生發電廠冷凝水處理及混床系統, 去除水中的陽性離子 。

Tulsion®  T-42 UPS 其均勻的顆粒直徑, 能取代傳統的離子交換樹脂, 並可以減少壓力損, 可以和Tulsion A-23 UPS 一起搭配使用於2B3T及超純水可再生的混床。

  典型特性（TYPICAL CHARACTERISTICS）： Tulsion T-42 UPS   

主體結構/Matrix structure              Cross linked polystyrene

型式(Type)                                                    Strong acid Cation exchange resin

物理型式/Physical form                                濕潤球狀/Moist spherical beads 

官能團/Functional group                              磺酸基/Sulphonic

粒徑Particle size (Mesh)                               Particle less than 0.3mm max. 1%

均勻系數(Uniformity coefficient)                Max. 1.25

平均粒徑(Harmonic Mean size)                   580 + 50 um

全交換容量(Total Exchange Capacity)        1.80 meq/ ml

離子型式(Ionic form)                                   Hydrogen (H+)

膨脹係數(Swelling (approximay))          7% from Na+ to H+ form.  

濕度/Moisture content                      53%

密度(Backwash settled density)                        800-840 g/l in H+ form
                                                                           830-870 g/l in Na+ form

允許溫度(Maximum temp. stability)            120°C in H+ form
                                                                       140°C in Na+form

PH范圍/PH range                                               0 - 14

溶解率(Solubility)                                             Insoluble in all common solvents

操作條件（OPERATION CONDITIONS）：    Tulsion T-42 UPS   

zui大操作溫度(Operating temperature , max 0 C)                120
操作pH 范圍(Operating pH range )                                       0 – 14
zui小樹脂床高度(Bed depth , mini mm)                               800
zui大(Service flow rate ,Maxi )                                              120 m3/hr/ m3
逆洗水量(Backwash flow rate)                                             9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion)                                  40 to 75%
再生藥劑(Regenerant )                                                         HCl, H2SO4 for H+ form,
再生藥劑用量(Regeneration levels. )                                   30 to 120 gms HCl/ lit.
                                                                                                40 to 250 gms H2SO4/ lit.
再生藥劑濃度(Regeneration concentration)                          3 - 5% HCl, 1.5 to 3% H2SO4
zui少通再生藥劑時間(Regeneration Contact time, mini)      20 min.
再生流量(Regeneration flow rate )                                        5 to 16 m3/hr/ m3
Regeneration slow rinse                                                          2 BV mini.
快洗用水(Fast Rinse )                                                            Service flow rate.
快洗水量(Fast Rinse Volume)                                                 2 to 3 BV